Butterfly valves are found throughout breweries and beverage processing systems, helping control the flow of beer, water, cleaning solutions, and other liquids. While the stainless steel valve body may last for years, the flexible seat inside the valve is a wear component that may eventually need to be replaced.

The good news is that you usually don’t need to replace the entire valve. If the valve body, disc, stem, and handle are still in good condition, replacing the butterfly valve seat may be all that’s needed to restore a dependable seal.

The challenge is identifying the correct replacement. A 1-1/2" butterfly valve seat, for example, is not necessarily interchangeable with every other 1-1/2" seat. Here’s how to identify, measure, and replace a brewery butterfly valve seat.

What is a butterfly valve seat?

A butterfly valve uses a circular stainless steel disc that rotates inside the valve body to start, stop, or regulate flow.

The butterfly valve seat is the flexible sealing component that surrounds the disc. When the valve closes, the disc presses against the seat to create a seal and prevent liquid from passing through the valve.

Because the seat is repeatedly compressed, exposed to process liquids, and subjected to cleaning and CIP cycles, it can wear over time.

How do I know if a butterfly valve seat needs to be replaced?

A leaking valve doesn’t automatically mean the entire valve needs replacement. First inspect the seat and other valve components. Common signs that a butterfly valve seat may need replacement include:

• Leaking when the valve is closed
• Cuts, cracks, or tears in the seat
• Flattened or permanently compressed areas
• Swelling or distortion
• Hardening or loss of flexibility
• Visible wear where the disc contacts the seat
• Damage caused during valve disassembly or cleaning

Also inspect the valve body and disc for damage, buildup, or other problems that could prevent a proper seal. If the seat is visibly damaged or no longer seals properly, replacement is generally the next step.

Are all 1-1/2" or 2" butterfly valve seats the same?

No. This is one of the most important things to know when ordering a replacement butterfly valve seat.

Two valves may both have 1-1/2" Tri-Clamp connections but use completely different seats. The outside diameter, inside diameter, thickness, hub dimensions, and overall profile can vary by valve manufacturer and design.

BreweryGaskets.com carries replacement butterfly valve seats compatible with many popular brewery and sanitary valve brands and styles. If you know the valve manufacturer and model or have markings on the old seat, start there. If you don’t, measurements can often help identify the correct replacement.

How do I identify an unknown butterfly valve seat?

Before throwing away the old seat, inspect it carefully and gather as much information as possible.

Manufacturer or brand: Check the valve body, handle, disc, and old seat for manufacturer names, logos, part numbers, or other markings.

Valve size: Determine the nominal valve size, such as 1-1/2", 2", 2-1/2", 3", or 4".

Markings on the seat: Some seats have molded numbers, letters, DN sizes, or other identification marks. Record exactly what you see.

Seat material and color: Note whether the existing seat appears to be EPDM, silicone, FKM/Viton, or another material. Color can sometimes help with identification, but don’t rely on color alone to determine material.

Equipment information: If the valve is part of a tank, filter, skid, or other piece of brewery equipment, record the equipment manufacturer and model as well.

Taking a few clear photos of the seat and valve can also make identification easier.

How to measure a butterfly valve seat

When the manufacturer or part number isn’t known, accurate measurements are especially important. For the best results, use calipers and measure in millimeters. Small dimensional differences can matter when matching a replacement seat.

Depending on the seat style, useful dimensions include:

Outside Diameter (OD) — Measure across the widest outside portion of the seat.

Inside Diameter (ID) — Measure across the inside opening of the seat.

Thickness (TH) — Measure the overall thickness of the seat.

Hole Size (HS) — Measure the hub or stem opening area where applicable.

Also compare the overall shape and profile of the old seat with the replacement. Don’t assume that nominal valve size alone identifies the seat. Two seats can look similar at first glance but have different dimensions and may not be interchangeable.

For additional help identifying your seat, see our Butterfly Valve Seat Measuring Guide for a basic diagram showing the measurements to take.

Should I measure in inches or millimeters?

We recommend measuring butterfly valve seats in millimeters whenever possible.

Many sanitary valve seats have relatively small dimensional differences, and millimeter measurements taken with a caliper make it easier to compare your existing seat with published replacement dimensions. The more accurate your measurements, the easier it is to narrow down the correct replacement.

What butterfly valve seat material should I choose?

EPDM and silicone are two common butterfly valve seat materials used in brewery and beverage applications. Other materials, including FKM/Viton, may be available for certain valves and applications.

EPDM is a popular general-purpose brewery material with good resistance to hot water, steam, detergents, and many commonly used cleaning solutions.

Silicone offers excellent flexibility and performs across a wide temperature range, making it useful in many food and beverage applications.

FKM/Viton may be appropriate for applications requiring greater resistance to certain chemicals, oils, or higher temperatures.

When replacing a seat, matching the original material is often the simplest approach. If you plan to change materials, consider the product, temperature, cleaning chemicals, and CIP conditions the seat will encounter.

How do you replace a butterfly valve seat?

Butterfly valve designs vary, so always follow the valve manufacturer’s instructions when available. In general, replacement involves:

1. Remove the valve from service and make sure the system is fully depressurized and safe to work on.
2. Remove the valve from the piping or equipment as necessary.
3. Disassemble the valve according to the manufacturer’s instructions.
4. Remove the disc, stem, and old seat as required by the valve design.
5. Inspect and clean the valve body and disc.
6. Compare the new seat with the old one to confirm that the dimensions and profile match.
7. Carefully install the new seat and reinstall the valve disc and stem.
8. Reassemble the valve, making sure the seat is properly positioned and isn’t pinched or twisted.
9. Operate the valve manually to make sure the disc opens and closes smoothly.
10. Check the valve for proper sealing before returning it to normal production.

If you’re unsure about the procedure for a particular valve, check with the valve manufacturer.

Why is my butterfly valve still leaking after replacing the seat?

If a new seat doesn’t solve the problem, don’t immediately assume the replacement seat is defective. Check for:

• Incorrect seat size or style
• Seat installed incorrectly
• Seat pinched or twisted during assembly
• Damaged or worn valve disc
• Damage or buildup on sealing surfaces
• Bent or worn valve components
• Improper valve assembly
• Incorrect seat material for the application

Comparing the new and old seats side-by-side before installation can help catch an incorrect replacement before the valve is reassembled.

When should I replace the entire butterfly valve?

If the butterfly valve seat is worn but the valve body, disc, stem, and handle are still in good condition, replacing the seat may be all that is needed. However, if other valve components are damaged, excessively worn, corroded, or no longer operating smoothly, replacing the complete valve may make more sense.

When replacing a complete valve, consider the valve size, connection type, handle style, seat material, and requirements of your brewery process. BreweryGaskets.com offers a selection of sanitary butterfly valves for brewery and beverage processing applications.

Need help identifying a butterfly valve seat?

With so many valve manufacturers and seat designs in use, identifying an unknown replacement isn’t always obvious.

If you aren’t sure which seat you need, gather as much information as possible:

• Valve manufacturer or brand
• Valve size
• Numbers or markings on the seat
• Outside diameter
• Inside diameter
• Overall thickness
• Hub dimensions
• Seat material, if known
• Clear photos of the seat and valve

Then compare your measurements with our Butterfly Valve Seat Measuring Guide or contact us for assistance.

BreweryGaskets.com stocks replacement butterfly valve seats for many popular brewery and sanitary valve styles, along with complete sanitary butterfly valves, Tri-Clamp gaskets, fittings, clamps, and other brewery sealing products.

Note: These are general guidelines only. Maintenance needs may vary based on production frequency, cleaning procedures, operating conditions, and the specific equipment used in your brewery. Always follow the equipment manufacturer’s instructions and recommendations for proper installation and components.

Few holidays bring people together quite like the Fourth of July. It’s a weekend filled with backyard barbecues, family gatherings, fireworks, and for many, a locally crafted beer enjoyed with friends.

At BreweryGaskets.com, we’d like to wish all of our customers, partners, and breweries across the country a safe and Happy Independence Day.

The American craft brewing industry represents the same entrepreneurial spirit that has defined our country for generations. Thousands of independent breweries continue to innovate, experiment with new recipes, support their local communities, and produce some of the finest beer in the world.

Whether you’re brewing a traditional pilsner, a hazy IPA, a crisp lager, or a seasonal summer ale, your dedication and craftsmanship are what make the industry so special.

The Fourth of July is one of the busiest beer weekends of the year. Breweries, taprooms, restaurants, and distributors work hard to keep customers supplied during one of the biggest celebrations of the summer.

Behind every successful brew are countless components working together — from tanks, pumps, hoses, valves, fittings, and clamps to the sanitary gaskets and seals that help maintain reliable, leak-free production.

Since 2005, BreweryGaskets.com has been proud to supply breweries and beverage producers with the sanitary components they rely on every day.

Our goal remains simple — provide dependable sealing solutions that help keep brewery and beverage production systems running smoothly, efficiently, and leak-free.

At BreweryGaskets.com, you can shop:

• Tri-Clamp gaskets and screens
• Manway gaskets
• Butterfly valves and valve seats
• Sanitary fittings and clamps
• Sight glasses
• Specialty gaskets, pump repair kits, and more

To every brewer, packaging operator, maintenance technician, brewery owner, and production team member — thank you for everything you do.

We appreciate the opportunity to support your operations and help keep production moving when it matters most.

Happy Fourth of July from all of us at BreweryGaskets.com!

Cheers to great brewing!

Thank you, Philadelphia! This year’s Craft Brewers Conference & BrewExpo America was another great event for the brewing industry. CBC 2026 brought together brewers, suppliers, distributors, and industry partners for several days of collaboration, problem-solving, and new ideas.

For over 15 years, BreweryGaskets.com has proudly exhibited at CBC, and we always appreciate the opportunity to connect face-to-face with the people who keep breweries running every day.

We appreciate hearing positive feedback from customers. From our brewery dedicated inventory, to our fast and free shipping, and our array of sizing resources we offer online. We pride ourselves on making BreweryGaskets.com a trusted resource and supplier of brewery gaskets and sealing solutions.

We had many attendees stop by with photos, questions, and even physical parts for help with sizing and identification. Being able to work through gasket and sealing challenges in person is always one of the most valuable parts of the show.

CBC Philly also reinforced the growing opportunity to support not only breweries, but distributors and other beverage production industries. We continue to see interest from distilleries, wineries, soda producers, non-alcoholic beverage companies, and other sanitary processing operations.

The show gave our team time to collaborate with customers, vendors, and partners on new product ideas, improvements, and ways we can continue to better support the industry. Some product opportunities include more custom sized o-rings & gaskets, a wider selection of color-coded gaskets for identification and even more specialty stainless steel fittings.

We always strive to stock the products our customers need - in stock, online, and ready to ship.

It was great to see how many customers use our website not only for ordering, but for brewery gasket sizing, measuring tips, and product information. We had the site running in the booth throughout the show and used it often during customer conversations.

Our goal remains simple — provide dependable sealing solutions that help keep brewery and beverage production systems running smoothly, efficiently, and leak-free.

At BreweryGaskets.com, you can shop:

• Tri-Clamp gaskets and screens
• Manway gaskets
• Butterfly valves and valve seats
• Fittings and clamps
• Specialty gaskets, O-rings, and pump repair kits
• Custom sealing solutions

Thank you again to everyone who stopped by our booth in Philadelphia. We appreciate the conversations, the feedback, and the continued support.

Until next time, we’re always here at BreweryGaskets.com when you need us.

Cheers to great brewing!

Sanitary sealing plays a critical role across all types of beverage production. While breweries are often the most visible users of tri-clamp systems and sanitary fittings, many of the same components are relied on every day in distilleries, wineries, cideries, and other beverage processing operations.

At BreweryGaskets.com, we work with a wide range of customers — from craft brewers to distributors and beverage producers — supporting systems that require consistent, leak-free, and sanitary performance.

Across beverage production, sanitary gaskets and fittings are commonly used in:

• Tanks and fermentation vessels
• Transfer lines and hoses
• Pumps and CIP systems
• Butterfly valves and fittings
• Packaging and bottling systems

No matter the product being produced, these systems depend on secure, sanitary seals that can handle varying temperatures, pressures, cleaning cycles, and processing conditions.

Breweries continue to be the foundation of these processing systems, with tri-clamp gaskets, manway gaskets, fittings, and valve seats used extensively throughout brewhouses, fermentation areas, and packaging lines. Frequent cleaning cycles and demanding production schedules make dependable sealing components essential.

Distilleries often operate under different conditions, including higher alcohol concentrations and elevated temperatures. In these applications, gasket material compatibility and durability become especially important for maintaining reliable seals and long-term performance.

Wineries and cider producers also rely heavily on sanitary fittings and gaskets throughout transfer, fermentation, storage, and bottling operations. Product integrity, sanitation, and compatibility with acidic products are all important considerations.

We also continue to see growing demand from beverage distributors and processors supporting larger-scale operations involving soda, flavored beverages, non-alcoholic products, and other sanitary processing applications.

While each segment of beverage production has unique requirements, the core needs remain the same:

• Sanitary, leak-free connections
• Proper sizing and fit
• Material compatibility
• Reliable long-term performance
• Stock products ready to ship

Even small differences in gasket sizing, materials, or installation can impact performance and maintenance requirements.

As the beverage industry continues to evolve, we continue expanding our offerings to support a wider range of applications including custom gasket solutions, expanded stainless steel fittings and color-coded gasket variations for identification

Our goal remains simple — provide dependable sanitary sealing solutions that help keep beverage production systems operating smoothly and efficiently.

Whether you're brewing beer, producing spirits, processing wine, or handling other beverages, BreweryGaskets.com is here to help with quality products, fast shipping, and knowledgeable support.

Explore our full selection of:

• Tri-Clamp gaskets and screens
• Manway gaskets
• Butterfly valves and valve seats
• Fittings and clamps
• Specialty gaskets, O-rings, and pump repair kits
• Custom sealing solutions

We look forward to continuing to support breweries, beverage producers, and sanitary processing operations across the industry.

The team at BreweryGaskets.com is excited to be heading to Philadelphia this April for the Craft Brewers Conference & BrewExpo America. We've been exhibiting at CBC for over 15 years and always enjoy connecting with brewers from across the country.

CBC BrewExpo is one of the largest gatherings of brewing professionals in the world, bringing together brewers, suppliers, and industry experts for several days of education, collaboration, and innovation in brewing.

If you're attending the show this year, we’d love for you to stop by and say hello.

Visit us at Booth 1426 — April 20–22 at the Pennsylvania Convention Center in Philadelphia.

CBC BrewExpo is always a great opportunity to connect with brewers from across the country and around the world. Whether you're running a small taproom brewery, managing a production facility, or expanding operations, we enjoy hearing about what you're brewing and how your systems are evolving.

At the show we’ll be showcasing many of the sanitary components breweries rely on every day, including:

• Tri-Clamp gaskets
• Manway gaskets
• Butterfly valves and valve seats
• Tri-Clamp clamps and fittings
• Sight glasses and other sanitary components

Our goal has always been simple — provide brewers with dependable sealing solutions that help keep production running smoothly and leak-free.

Trade shows like CBC give us a chance to reconnect with long-time customers, meet new brewers, and hear firsthand what equipment and parts breweries need most.

If you're attending CBC BrewExpo Philadelphia this year, be sure to stop by Booth 1426 and meet the BreweryGaskets.com team.

You can learn more about the event at the official Craft Brewers Conference website.

And if you can’t make the show, you can always explore our full selection of sanitary gaskets, clamps, valves, and fittings online at BreweryGaskets.com.

We look forward to seeing many of you in Philadelphia!

If you work in a brewery, you likely interact with tri-clamp connections every day. From brewhouse piping to fermenters, butterfly valves, pumps, hoses, and CIP lines, the tri-clamp system is the standard for sanitary brewing connections.

At the center of that system are tri-clamp sanitary clamps. This guide explains how tri-clamp sanitary clamps fit into the full brewery tri-clamp system, how they work with fittings and gaskets, and how to properly select, tighten, and maintain them for reliable, leak-free operation.

How Do Tri-Clamp Sanitary Clamps Work in a Brewery Tri-Clamp System?

A tri-clamp system is a sanitary connection method used throughout breweries, beverage facilities, and food processing plants. It allows components to be connected quickly while maintaining cleanability and sanitary integrity.

A tri-clamp connection consists of three core components:

Tri-clamp ferrules: Found on tanks, fittings, valves, hoses, and accessories
Sanitary gaskets: Provide the actual seal between ferrule faces
Tri-clamp sanitary clamps: Apply even pressure to hold the connection together

Tri-clamp sanitary clamps are simple in design but critical in function. When installed correctly, they apply even compression so the gasket can seal — and they do it in a way that’s easy to break down for cleaning and maintenance.

Here’s how a tri-clamp connection comes together:

1) Two ferrules are aligned face-to-face
2) A gasket is placed between the ferrule faces
3) The tri-clamp sanitary clamp wraps around the ferrule lips
4) Tightening the tri-clamp sanitary clamp pulls the ferrules together evenly

Proper clamp alignment and even tightening allow the gasket to compress uniformly, creating a sanitary seal. Many tri-clamp leaks are caused by uneven clamp pressure or over-tightening. Because these connections are frequently assembled and disassembled for cleaning and maintenance, tri-clamp sanitary clamp condition directly impacts uptime, sanitation, and overall efficiency.

Tri-Clamp Sizes Explained

Tri-clamp sizes are based on the ferrule size — not the outside diameter of the clamp itself. Common brewery sizes include: 1.5″ (the brewery standard), 2″ (higher-flow transfer lines), and 3″ and larger (main process and CIP headers).

A 1.5″ tri-clamp sanitary clamp fits a 1.5″ ferrule — whether it’s on a fitting, valve, hose, or sight glass. Mixing clamp sizes or mismatching ferrules will almost always lead to leaks. If you’re unsure, start with the ferrule size and build the connection from there: ferrule + gasket + clamp.

Tri-clamp sanitary clamp styles can vary by application: single-pin clamps handle most standard brewery connections, while double-pin and heavy-duty clamps provide more even compression and added strength for larger, vibrating, or higher-pressure lines.

Brewery environments are demanding, so material matters: 304 stainless works for most brewery and CIP use, while 316 offers added corrosion resistance in harsher conditions, both providing durable, sanitary sealing.

Related pages: Sanitary Butterfly Valves, Tri-Clamp Sight Glasses, Sanitary Fittings & Clamps.

How Tight Should a Tri-Clamp Sanitary Clamp Be?

In most brewery applications, hand-tight is sufficient. Over-tightening can cause gasket deformation, uneven sealing, bent clamp bands, and persistent leaks. Rule of thumb: Tighten until the gasket is evenly compressed — not flattened. It’s good practice to re-check clamp tightness periodically, especially after brewing or cleaning operations and when installing new gaskets.

Tri-Clamp Sanitary Clamp Maintenance Tips

Basic inspection and maintenance can significantly extend clamp life. Inspect clamps for bent or warped bands, worn hinge pins, stripped wing nuts, and uneven closing. For cleaning, remove clamps during deep cleaning, rinse off sugars and chemical residue, and avoid prolonged soaking in harsh chemicals.

When to Replace a Tri-Clamp Sanitary Clamp

Replace tri-clamp sanitary clamps if you notice repeated leaks at the same connection, excessive tightening required, visible warping or stress marks, or loose/damaged hinge hardware. Keeping spare clamps on hand helps prevent downtime during cleaning, maintenance, or unexpected repairs.

Choosing the Right Tri-Clamp Sanitary Clamp for Your Brewery

Using the right tri-clamp sanitary clamp — paired with the correct gasket — helps ensure consistent, leak-free connections throughout your brewery. If you’re ever unsure about clamp sizing, styles, or compatibility, explore BreweryGaskets.com for tri-clamp sanitary clamps, gaskets, fittings, valves, and sanitary hardware designed for dependable, leak-free performance.

Fall is here — and with it comes crisp air, colorful leaves, holiday fun, and one of the busiest brewing seasons of the year. From pumpkin ales and spiced stouts to Oktoberfest lagers and brown ales, autumn brings creativity and tradition to taps everywhere. Breweries across the country are rolling out their fall releases — beers that highlight the flavors and feeling of the season.

But as fermenters fill and kegs roll out, your equipment faces heavier workloads and thicker, stickier recipes. Between pumpkin puree, caramel malts, and cinnamon or nutmeg additions, these seasonal brews can put extra stress on your gaskets, valves, and fittings. And the only thing scarier than a haunted brewhouse is a leaking one.

Seasonal Brews, Seasonal Demands

Autumn brewing often means more sugars, solids, and spices entering the system — all of which can lead to buildup and wear if equipment isn’t properly maintained. A little extra attention to preventive maintenance before your next big batch helps keep everything running smoothly through the season’s rush.

Before the mash tun heats up, carve out a few minutes for these quick checks:

Tri-Clamp Gaskets: Inspect for cracks, flattening, or residue buildup — especially after brewing with purees or spiced ingredients. Silicone and EPDM gaskets resist high temperatures and a variety of brewery materials, but even durable materials degrade over time. Replace any that show signs of wear.

Manway Gaskets: Check the condition and sealing surface of tank doors. A compromised seal can invite oxygen into a batch or cause unwanted leaks during fermentation.

Butterfly Valve Seats: Ensure smooth operation and verify that seats aren’t sticky, swollen, or uneven from prior cycles. A tight, consistent seal prevents product loss and improves flow control.

Clamps and Fittings: Tighten, clean, and inspect for corrosion or pitting — especially in humid brewhouses or around hot water zones.

A few minutes of inspection and replacement today can prevent hours of downtime tomorrow — and ensure your pumpkin ale flows without interruption.

Raise a Glass to a Smooth Season

There’s a lot to celebrate this time of year — new brews, bustling taprooms, and the return of fall flavors. Keeping your brewery in peak condition means fewer surprises, better quality control, and more time spent brewing what you love.

So before the next batch of pumpkin porter or Oktoberfest lager kicks off, take a moment to give your equipment a quick tune-up. Then sit back, enjoy a pint, and toast to a season that’s smooth, flavorful, and fun.

Need replacement gaskets or fittings before your next brew?
Explore BreweryGaskets.com for tri-clamp gaskets, clamps, valve seats, and manway gaskets designed for dependable, leak-free performance — even with the stickiest fall recipes.

When it comes to maintaining product quality and process efficiency in breweries and sanitary beverage processing, Tri-Clamp screen gaskets and sock screen gaskets can be helpful filtration tools. Understanding when to use these components and the mesh to micron variations, can help prevent contamination, improve clarity, and keep production running smoothly.

What Are Screen Gaskets?

Screen gaskets are standard Tri-Clamp sanitary gaskets with an integrated mesh screen molded or inserted into the gasket body. The mesh acts as a filter, trapping particles and preventing debris from passing through your process lines.

They are available in a wide variety of mesh counts and micron ratings. Elastomer materials include EPDM, Silicone, Viton, and PTFE and screen materials are often 316 Stainless Steel.

Common Applications:

• Trap loose gasket particles or foreign matter
• Protect downstream pumps, valves, and equipment
• Catch seeds, hops, pulp, or other solids during production
• Clarify beer, cider, wine, or juices

When to Use Sock Screen Gaskets

Sock screen gaskets function similarly but feature an extended "sock" or tubular mesh element that increases the available surface area for filtration. This allows for higher flow rates while maintaining effective filtration.

• Increased filtration surface area = longer run times before cleaning
• Improved flow rates compared to flat screens
• Capture fine particulates in high-volume processing
• Great for filtering hop material, trub, or yeast in breweries

Choosing the Right Micron or Mesh Size

Selecting the correct mesh count or micron size depends on your filtration goals. Finer mesh captures smaller particles but may require more frequent cleaning, while coarser mesh allows greater flow but catches only larger particles.

Here are a few typical examples of mesh sizes and uses:

Note: Images and mesh-to-micron conversions are approximate. Always verify actual screen specifications before ordering. For a more detailed visual guide and full micron-to-mesh conversion chart, check out our Tri Clamp Mesh Screen Gasket Selection Guide.

Screen gaskets aren’t used in every processing system, and in many cases, that’s by design. Clean-in-place (CIP) systems, for example, often use upstream filtration that eliminates the need for additional inline screens. In some operations, maximizing flow rate is a higher priority, and benefit from unrestricted throughput. Maintenance is also a consideration—since screen gaskets require periodic inspection and cleaning.ed upkeep.

That said, the benefits of screen and sock gaskets are real. They serve as a final line of defense against gasket fragments or debris and offer critical protection for pumps, valves, and sensitive equipment. For many brewers and processors, they’re also a simple yet effective quality control tool—enhancing product clarity, reducing contamination risk, and ensuring consistent results.

Helpful Product Links

• Shop Tri Clamp Screen Gaskets
• Shop Flat Mesh Screen Gaskets
• Shop Sock Screen Gaskets
• Screen Gasket Micron to Mesh Conversion Chart

Need Help?

If you're not sure which gasket or screen fits your application, feel free to contact us. We're always happy to assist with selection and sizing.

BreweryGaskets.com is a trusted partner in brewery and beverage production, offering reliable maintenance and sealing solutions. We offer a wide range of gaskets, sealing products, and fittings designed to meet the unique needs of breweries and beverage production. Our products ensure dependable, leak-free production, from Tri-Clamps and Manway Gaskets to Butterfly Valves and Brewery Fittings. Our focus on quality and customer-driven inventory makes us a go-to source for brewers looking to maintain high standards in their operations. Visit us and order online at BreweryGaskets.com.

Thank you, Indianapolis! This year’s Craft Brewers Conference and BrewExpo America proved once again it is the premier national event for the brewing industry. CBC 2025 brought together the people, ideas, and energy to tap into the future of craft brewing.

For nearly 15 years, BreweryGaskets.com has proudly participated in CBC. We’re honored to continue supporting independent brewers and to be a member of the Brewers Association.

Highlights from CBC Expo Indianapolis

CBC Indy was a well-attended, high-energy event that gave us the chance to connect with many brewers and industry partners. We shared ideas and offered support for all those looking for sealing solutions.  Overall, a lot of positive takeaways from CBC Indy:

• Strong Booth Traffic & Product Interest: We had great conversations with brewers of all sizes and showcased our wide range of products—Tri-Clamp gaskets, manway gaskets, butterfly valves, fittings, and more.
• Customer Connections: It was a pleasure meeting new and returning customers and we appreciate the positive feedback on our products, website tools, and customer service.
• Online Tools in Action: Brewers used our measuring tools right at the booth to size manway gaskets and valve seats. We’ll keep improving these features to make their jobs easier.
• New Product, Partnership & Market Opportunities: We connected with manufacturers and distributors to explore new ideas for product development, customized valve and fitting solutions, and expanded one-stop shopping for brewers. We also saw growing interest from cideries, wineries, and distilleries—highlighting opportunities beyond beer.
• Industry Connections, Insights & Events: We had great conversations with guilds, associations, and expo organizers throughout the week. CBC 2025 also featured a wide range of seminars on brewing trends, operations, innovation, and growth strategies. The welcome reception at Lucas Oil Stadium was a fun and memorable kickoff to a productive event.
• Well-Run Event from Start to Finish: Kudos to the Brewers Association and the Indianapolis Convention Center for smooth logistics, from setup to teardown. Everything ran like a well-oiled machine.

Sealing Solutions from Brewery Gaskets

We know how important it is to keep your brewery running smoothly and leak-free with reliable, high-quality parts. Whether you're sourcing replacement gaskets, sanitary fittings, or sealing solutions, Brewery Gaskets is here to help.

Visit our site to shop brewery gaskets, valves and fittings

• Tri-Clamp Gaskets and Screens
• Manway Gaskets
• Butterfly Valves and Valve Seats
• Fittings and Clamps
• Specialty Gaskets, O-Rings and Pump Repair Kits
• Custom Sealing Solutions

Need support? Our team is always ready to assist. Need parts fast? Most orders ship same day - from our extensive, customer-driven inventory.

Looking Ahead

The Brewery Gaskets team is already looking forward to seeing you at CBC 2026 in Philadelphia!

Until then, we’re always here at BreweryGaskets.com when you need us.

Cheers to perfect brewing!

BreweryGaskets.com is a trusted partner in brewery and beverage production, offering reliable maintenance and sealing solutions. We offer a wide range of gaskets, sealing products, and fittings designed to meet the unique needs of breweries and beverage production. Our products ensure dependable, leak-free production, from Tri-Clamps and Manway Gaskets to Butterfly Valves and Brewery Fittings. Our focus on quality and customer-driven inventory makes us a go-to source for brewers looking to maintain high standards in their operations. Visit us and order online at BreweryGaskets.com.

Note: These tasks are intended as general guidelines. Actual maintenance needs may vary based on your batch size, production frequency, cleaning routines, and the specific equipment used in your brewery. Always consult and follow the manufacturer’s instructions for all gaskets, valves, pumps, tanks, hose, and related components.

Key Brewery Maintenance Tips

Breweries large and small rely on precision, sanitation, and efficiency to produce top-quality beer. One small maintenance slip can lead to contamination, leaks, or costly downtime. Over time, gaskets, seals, and fittings degrade due to exposure to heat, pressure, and chemicals. To keep things running smoothly, you need a clear, proactive plan for inspecting and replacing gaskets, valves, and fittings. Let’s look at some general best practices for brewery maintenance.

Routine Brewery Maintenance Checklist

Frequency (daily, weekly, monthly) varies based on production and other factors.

• Tri-Clamp Gaskets (EPDM, Silicone, Buna, Viton®, Teflon®, etc.)
  • Inspect for cracks, swelling, hardening, or discoloration.
  • Replace if showing any wear or signs of chemical degradation.
    
    
• Butterfly Valves & Valve Seats
  • Operate handles to check for smooth function and full shutoff.
  • Look for leaks, residue, or signs of seat wear.
  • Ensure no sticking or resistance in operation.
  • Inspect seats for integrity and replace if worn.
  • Replace valve or seat if leaking, damaged, or not operating smoothly.
    
    
• Tri-Clamp Fittings & Clamps
  • Ensure secure, leak-free connections.
  • Wipe down to prevent buildup; inspect for damage or stress.
  • Tighten clamps and fittings as necessary to maintain a secure seal.
  • Confirm clamps are snug but not overtightened.
  • Look for bent arms, stripped threads, or wing nut wear.
  • Replace damaged clamps or fittings as needed.
    
    
• Manway Gaskets
  • Monitor for signs of wear, aging, or chemical degradation.
  • Check for compression set.
  • Clean sealing surfaces and replace gaskets if needed.
  • Replace gaskets if any wear or damage is noted.
    
    
• Screen Gaskets & Sock Screens
  • Remove and inspect for clogging, mesh damage, or deformation.
  • Clean or replace depending on product run and condition.
    
    
• Hoses & Connections
  • Check for kinks, brittleness, or loose ends.
  • Verify proper attachment and integrity of crimped ends and fittings.
  • Inspect for fatigue, surface wear, or weak points.
  • Replace hoses or fittings if compromised.
    
    
• Pump Seals & O-Rings
  • Look for leaks, drips, or unusual pump noise.
  • Replace worn or flattened o-rings and seals.
    
    
• Pump and Valve Rebuilds
  • Periodically disassemble pumps and valves to inspect components for microbial buildup, cracks, or chemical damage.
  • Replace internal seals using Pump Repair Kits.
    
    
• Lubricate Moving Components
  • Apply food-grade lubricant to O-rings, valve stems, handles, and pump shafts where applicable.
    
    
• Flat & Specialty Gaskets (Bevel Seat, SMS, DIN, John Perry, etc.)
  • Don’t Forget Lower-Touch Components.
  • Schedule routine checks for bevel seat, filter gaskets, sightglass gaskets.
  • Inspect during scheduled equipment downtime or disassembly.
  • Replace if flattened, cracked, or exposed to improper chemicals.
    
    
• CIP System Checks
  • Ensure spray balls, ports, and valves are clean and functioning.
  • Verify that spray patterns are uniform and unobstructed.
  • Inspect gaskets for degradation.
  • Replace spray components or gaskets if needed.
    
    

Additional Notes and Best Practices

• Train Your Team to Spot Early Warning Signs
  • Leaks, loose fittings, or sticky valve handles often signal worn gaskets or failing seals.
  • Daily awareness helps prevent costly downtime.
    
    
• Choose the Right Materials
  • Ensure your gaskets are compatible with your operations and cleaning chemicals.
  • Check manufacturer specs for compatibility
  • Regularly evaluate the performance of gasket materials based on brewing conditions.
    
    
• Replace Gaskets, Seals and Fittings Regularly
  • Replace gaskets and seals showing early signs of wear before they fail.
  • Inspect and Replace During Routine Disassembly.
  • Use scheduled downtime to inspect and replace parts to avoid disruption.
    
    
• Audit and Restock Inventory for Critical Spares
  • Maintain a list of replacement parts.
  • Log replaced components to track patterns and optimize ordering.
  • Review inventory often to ensure adequate stock levels.
    
    
• Storage
  • Store gaskets and seals in a cool, dry place away from sunlight.
  • Label and date spares for proper rotation.
  • Avoid compressing gaskets during storage to prevent deformation.

Typical Sample Inventory List to Keep on Hand

• Tri-Clamp Gaskets - 10+ per common size
• Manway Gaskets - 2+ per frequently used vessel
• Butterfly Valve Seats - 2+ per valve type
• Tri-Clamp Clamps - 6+ per key size
• Backup Sanitary Fittings (elbows, tees) - 2+ per type
• Screen Gaskets and Sock Screens
• O-rings – 6+ per commonly used type
• Pump and Valve Rebuild Kits

Final Thoughts

Having a maintenance plan, parts list, and organized inventory of spare parts can help breweries  prevent unexpected failures, maintain sanitation standards, reduce costly interruptions, and ensure smooth production. Regular maintenance of gaskets, valves, and fittings can prolong equipment lifespan and enhance beer quality.

Investing in preventative care can save time, money, and keep your brewery running at peak performance.

For trusted, brewery-ready components, visit BreweryGaskets.com for fast, reliable access to gaskets, valves, fittings, and sealing solutions tailored for your brewing operations.